|
Ready to begin? Let's get started.
| 
| 
|
Set up your phone
|
Insert the battery
- Remove the battery door on the back of your smartphone.
- Insert the battery. It is packaged separately when you first unpack your smartphone.
- Replace the battery door.
The battery comes with a sufficient charge to complete the setup process and activate your phone. After activation, we recommend charging your device for 3.5 hours to give it a full charge.
- Plug the AC charger into a wall outlet.
- Connect the charger cable to the charger jack on the bottom of the device. Make sure the arrow on the connector is facing up, toward your Treo device screen.
- To confirm that your device is charging, check the indicator light.
- Red indicates that your device is charging.
- Green indicates that your device is fully charged.
If the battery is fully drained, it may take a few moments for the indicator light to turn on while the battery is charging. See what the battery icons mean.
|
| 
|
|
|
Check your phone
If you bought your device at a store, it is ready to use. Skip ahead to "Make a Call."
If you bought your device online, check to see if it is locked by pressing Phone  . Look at the upper right corner. What does it say?
- Carrier name: your phone is ready to use; skip ahead to "Make a Call."
- Phone Off:turn on your device's phone by pressing and holding Power/End
 . Then skip ahead to "Make a Call."
- Locked: you need to unlock your device. To unlock your device, enter your four-digit lock code using the keyboard. If you do not know the code, try the following:
- The last four digits of your Social Security number
- The last four digits of your wireless phone number
- 0000 (four zeros)
If none of these works, you may need to activate your phone. Call your mobile service provider for assistance.
|
| 
|
|
|
|
Make a call
- Press Phone .
- Enter the number you want to call. Tip: There are two ways to enter a phone number: press the numbered keys on the keyboard, or use the stylus to tap the onscreen buttons.
- Press Talk
 to dial.
- After you finish the call, press Power/End to end the call.
|
| 
|
|
|
|
What?s my phone number? To view your phone number, press Phone , press Menu  , select Options, and then select Phone Info.
|
|
|
Tips
- If your device screen turns off while setting up or using your device, press Power/End to wake up the screen.
- Want to learn what the icons at the top of the Phone screen mean? Click here.
Connect to your desktop PC and sync
Synchronizing means that information that is entered or updated in one place (your smartphone or your desktop PC) is automatically updated in the other, so there?s no need to enter the information twice. We strongly recommend that you synchronize frequently to keep your information up-to-date (and backed up) in both locations.
IMPORTANT: You must install the software that came with your Treo 700p device even if you already have Palm Desktop software installed on your computer.
Do not uninstall the previous version of Palm Desktop. Install your Treo 700p software over the existing version on your desktop PC.
- Insert the Palm Software Installation CD into your desktop PC.
- Install the software:
- Windows: follow the onscreen instructions to install the software.
- Mac: double-click the CD icon, and then double-click PalmSoftware.pkg.
- When prompted, connect your device and your desktop PC.
- The installer will prompt you to sync: press the sync button on the USB sync cable.
- When synchronization is complete, press Applications
on your device to view and start using the applications.
What does the first synchronization do?
The first time you synchronize, you set up a relationship between your device and your desktop PC that lets you easily transfer new or updated information between the device and desktop PC any time you sync in the future.
Diagram of your Treo 700p smartphone
Keep going: more setup options for your smartphone
